✨ New Arrivals Just Dropped!Explore
Experience Resin Bundle
HomeStore

Experience Resin Bundle

Experience Resin Bundle

What's included

【Shipping to US/EU】
  • Standard Resin V2*1KG (Random Colour)
  • ABS-Like Resin Pro 2*1KG (Random Colour)
  • Water Wash ABS-Like Resin 3.0*1KG (Random Colour)
  • Tough Resin 2.0*1KG (Random Colour)
【Shipping to UK】
  • Standard Resin*1KG (Random Colour)
  • ABS-Like Resin Pro 2*1KG (Random Colour)
  • Water Wash ABS-Like Resin 3.0*1KG (Random Colour)
  • Tough Resin 2.0*1KG (Random Colour)
Note

Due to limited stock, substitutions with random alternatives may occur if any colors are sold out. Product images are for reference only; actual colors may vary.

Estimated Shipping Time

🚚 Ships in 24 hours

Introduction
Four advanced resins engineered for serious makers. From high‑detail standard prints to solvent‑free ABS‑like parts, pro‑level mechanical strength, and extreme‑flexibility tough components – this kit delivers industrial capability without the complexity.

Standard Resin V2
Elongation at break increased by 93% (now 25‑30%) vs the previous generation, reformulated from classic, delivering unprecedented toughness. Resulting models resist drops/impacts, flex without fracture, and balance strength with ductility.
ABS-Like Resin Pro 2
Engineered with enhanced tensile and flexural strength, giving you the perfect balance of toughness and resilience.
Water Wash ABS-Like Resin 3.0
Enhanced with hydrophilic agents, you can now wash off the residual liquid resin with water, reducing post-processing duration and costs. 
Tough Resin 2.0
Elongation at break up to 72%, impact strength 245 J/m. Anycubic Tough Resin 2.0 delivers comprehensive upgrades in tensile strength and flexibility, achieving the optimal balance of high strength and exceptional toughness.
Instructions for Use
1. Before use
  • Shake the liquid resin well
  • Clean the resin tank and build plate
  • Ensure the tank bottom remains highly transparent
  • Confirm the release film is undamaged
  • Verify correct print parameter settings
  • Recommended printing environment: 20-35 °C (to prevent temperature-related failures)
2. During Use
  • Unscrew the bottle cap and remove the sealing film
  • Pour resin into the tank without exceeding the max fill line
3. After Printing
  • Use the included tools for post-processing:
    Scraper /Flush cutters /Tweezers / Gloves
    ≥95% IPA cleaning solution
4. Post-Processing
  • Remove models from the build plate using a scraper, and remove supports
  • Clean models in the Anycubic Wash & Cure machine for ~10 minutes (use ≥95% alcohol or cleaner)
  • Dry models: Air-dry, blow-dry, or use drying chamber (prevents water absorption/cracking)
  • Secondary curing: Cure models for 3-5 minutes
  • Resin recycling: Filter through a 100-mesh sieve
Precautions
  • Store at room temperature away from light
  • Recommended use temperature: >20°C (low temperatures reduce success rate; high temperatures accelerate pigment settling)
  • If pigment settles: Stir with a plastic scraper or shake the resin bottle
  • Resin cures under sunlight: Print in dim, ventilated areas or cover the printer
  • Remove models promptly after washing to avoid property degradation
    • Always wear nitrile gloves and goggles (avoid skin/eye contact)
    • Waste disposal: Cure resin completely before discarding as solid waste
    • Maintain ventilation; keep liquid away from pregnant women, children, and pets
    Ps: Material properties will vary depending on the molding equipment, post-curing method, and testing equipment. For safety information, please refer to the MSDS of this product. If you encounter any problems while using it, please feel free to contact us.
    Select Shipping To
    Select Size
    From $25.75

    Original: $85.85

    -70%
    Experience Resin Bundle—

    $85.85

    $25.75

    Experience Resin Bundle

    What's included

    【Shipping to US/EU】
    • Standard Resin V2*1KG (Random Colour)
    • ABS-Like Resin Pro 2*1KG (Random Colour)
    • Water Wash ABS-Like Resin 3.0*1KG (Random Colour)
    • Tough Resin 2.0*1KG (Random Colour)
    【Shipping to UK】
    • Standard Resin*1KG (Random Colour)
    • ABS-Like Resin Pro 2*1KG (Random Colour)
    • Water Wash ABS-Like Resin 3.0*1KG (Random Colour)
    • Tough Resin 2.0*1KG (Random Colour)
    Note

    Due to limited stock, substitutions with random alternatives may occur if any colors are sold out. Product images are for reference only; actual colors may vary.

    Estimated Shipping Time

    🚚 Ships in 24 hours

    Introduction
    Four advanced resins engineered for serious makers. From high‑detail standard prints to solvent‑free ABS‑like parts, pro‑level mechanical strength, and extreme‑flexibility tough components – this kit delivers industrial capability without the complexity.

    Standard Resin V2
    Elongation at break increased by 93% (now 25‑30%) vs the previous generation, reformulated from classic, delivering unprecedented toughness. Resulting models resist drops/impacts, flex without fracture, and balance strength with ductility.
    ABS-Like Resin Pro 2
    Engineered with enhanced tensile and flexural strength, giving you the perfect balance of toughness and resilience.
    Water Wash ABS-Like Resin 3.0
    Enhanced with hydrophilic agents, you can now wash off the residual liquid resin with water, reducing post-processing duration and costs. 
    Tough Resin 2.0
    Elongation at break up to 72%, impact strength 245 J/m. Anycubic Tough Resin 2.0 delivers comprehensive upgrades in tensile strength and flexibility, achieving the optimal balance of high strength and exceptional toughness.
    Instructions for Use
    1. Before use
    • Shake the liquid resin well
    • Clean the resin tank and build plate
    • Ensure the tank bottom remains highly transparent
    • Confirm the release film is undamaged
    • Verify correct print parameter settings
    • Recommended printing environment: 20-35 °C (to prevent temperature-related failures)
    2. During Use
    • Unscrew the bottle cap and remove the sealing film
    • Pour resin into the tank without exceeding the max fill line
    3. After Printing
    • Use the included tools for post-processing:
      Scraper /Flush cutters /Tweezers / Gloves
      ≥95% IPA cleaning solution
    4. Post-Processing
    • Remove models from the build plate using a scraper, and remove supports
    • Clean models in the Anycubic Wash & Cure machine for ~10 minutes (use ≥95% alcohol or cleaner)
    • Dry models: Air-dry, blow-dry, or use drying chamber (prevents water absorption/cracking)
    • Secondary curing: Cure models for 3-5 minutes
    • Resin recycling: Filter through a 100-mesh sieve
    Precautions
    • Store at room temperature away from light
    • Recommended use temperature: >20°C (low temperatures reduce success rate; high temperatures accelerate pigment settling)
    • If pigment settles: Stir with a plastic scraper or shake the resin bottle
    • Resin cures under sunlight: Print in dim, ventilated areas or cover the printer
    • Remove models promptly after washing to avoid property degradation
      • Always wear nitrile gloves and goggles (avoid skin/eye contact)
      • Waste disposal: Cure resin completely before discarding as solid waste
      • Maintain ventilation; keep liquid away from pregnant women, children, and pets
      Ps: Material properties will vary depending on the molding equipment, post-curing method, and testing equipment. For safety information, please refer to the MSDS of this product. If you encounter any problems while using it, please feel free to contact us.

      Product Information

      Shipping & Returns

      Description

      What's included

      【Shipping to US/EU】
      • Standard Resin V2*1KG (Random Colour)
      • ABS-Like Resin Pro 2*1KG (Random Colour)
      • Water Wash ABS-Like Resin 3.0*1KG (Random Colour)
      • Tough Resin 2.0*1KG (Random Colour)
      【Shipping to UK】
      • Standard Resin*1KG (Random Colour)
      • ABS-Like Resin Pro 2*1KG (Random Colour)
      • Water Wash ABS-Like Resin 3.0*1KG (Random Colour)
      • Tough Resin 2.0*1KG (Random Colour)
      Note

      Due to limited stock, substitutions with random alternatives may occur if any colors are sold out. Product images are for reference only; actual colors may vary.

      Estimated Shipping Time

      🚚 Ships in 24 hours

      Introduction
      Four advanced resins engineered for serious makers. From high‑detail standard prints to solvent‑free ABS‑like parts, pro‑level mechanical strength, and extreme‑flexibility tough components – this kit delivers industrial capability without the complexity.

      Standard Resin V2
      Elongation at break increased by 93% (now 25‑30%) vs the previous generation, reformulated from classic, delivering unprecedented toughness. Resulting models resist drops/impacts, flex without fracture, and balance strength with ductility.
      ABS-Like Resin Pro 2
      Engineered with enhanced tensile and flexural strength, giving you the perfect balance of toughness and resilience.
      Water Wash ABS-Like Resin 3.0
      Enhanced with hydrophilic agents, you can now wash off the residual liquid resin with water, reducing post-processing duration and costs. 
      Tough Resin 2.0
      Elongation at break up to 72%, impact strength 245 J/m. Anycubic Tough Resin 2.0 delivers comprehensive upgrades in tensile strength and flexibility, achieving the optimal balance of high strength and exceptional toughness.
      Instructions for Use
      1. Before use
      • Shake the liquid resin well
      • Clean the resin tank and build plate
      • Ensure the tank bottom remains highly transparent
      • Confirm the release film is undamaged
      • Verify correct print parameter settings
      • Recommended printing environment: 20-35 °C (to prevent temperature-related failures)
      2. During Use
      • Unscrew the bottle cap and remove the sealing film
      • Pour resin into the tank without exceeding the max fill line
      3. After Printing
      • Use the included tools for post-processing:
        Scraper /Flush cutters /Tweezers / Gloves
        ≥95% IPA cleaning solution
      4. Post-Processing
      • Remove models from the build plate using a scraper, and remove supports
      • Clean models in the Anycubic Wash & Cure machine for ~10 minutes (use ≥95% alcohol or cleaner)
      • Dry models: Air-dry, blow-dry, or use drying chamber (prevents water absorption/cracking)
      • Secondary curing: Cure models for 3-5 minutes
      • Resin recycling: Filter through a 100-mesh sieve
      Precautions
      • Store at room temperature away from light
      • Recommended use temperature: >20°C (low temperatures reduce success rate; high temperatures accelerate pigment settling)
      • If pigment settles: Stir with a plastic scraper or shake the resin bottle
      • Resin cures under sunlight: Print in dim, ventilated areas or cover the printer
      • Remove models promptly after washing to avoid property degradation
        • Always wear nitrile gloves and goggles (avoid skin/eye contact)
        • Waste disposal: Cure resin completely before discarding as solid waste
        • Maintain ventilation; keep liquid away from pregnant women, children, and pets
        Ps: Material properties will vary depending on the molding equipment, post-curing method, and testing equipment. For safety information, please refer to the MSDS of this product. If you encounter any problems while using it, please feel free to contact us.